Avaya 555-233-116 Manuale Utente
Set clock options
Issue 4 October 2002
165
555-233-116
Cabling the Stratum 3 clock
shows typical connections to a Stratum 3 clock cabinet. Connections
are made through the yellow field cross-connect. A custom Y-cable (H600-274)
connects the CSU to the DS1 circuit pack and taps off the input for the Stratum 3
clock. A resistor built into the cable to provides the necessary isolation between
the system and the clock. The Y-cable plugs directly into the CSU and connects to
standard cables for interface to the system and the yellow field on the MDF.
connects the CSU to the DS1 circuit pack and taps off the input for the Stratum 3
clock. A resistor built into the cable to provides the necessary isolation between
the system and the clock. The Y-cable plugs directly into the CSU and connects to
standard cables for interface to the system and the yellow field on the MDF.
The H600-307 cable connects the system end of the Y-cable to a DS1 circuit pack
(shown as TN464F or TN767E). The B25A cable connects the clock end of the
Y-cable to the yellow field on the MDF.
(shown as TN464F or TN767E). The B25A cable connects the clock end of the
Y-cable to the yellow field on the MDF.