Toshiba DK Backup Manuale Utente

Dial DK

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

2. Press 

 and the Customer List displays.

3. Highlight the desired customer, and press 

. The DKAdmin/DKBackup Main Menu 

displays.

If you have multiple customers, you can use the Find function to move quickly to 
another customer by typing the first letter of the Customer ID number. The program 
highlights the first customer which matches your entry. Press 

 to select the 

highlighted customer or re-enter.

After selecting a customer, the bottom of the DKAdmin/DKBackup Main Menu displays a 
box along the bottom of the screen. This box displays important information about the 
customer, including the customer name, processor type, processor software version level, 
feature key installed on the processor, and the disk directory (see 

Figure 6

).

●

If the new customer is selected, the default database for the customer’s processor is loaded 
into DKAdmin/DKBackup.

●

Software version Release 3 applies to Release 3 and Release 3.1 processors.

You now may use the options in the Backup Menu to check the DK Processor or Backup/
Restore Data.

The DKAdmin/DKBackup to Strata DK communications link can be made via modems, 
Toshiba PDIUs or RPCIs, using the DKAdmin/DKBackup dialing strings (DIU, modem, and/
or After Connect).

Dialing strings are not necessary if the DKAdmin/DKBackup PC is connected directly to the 
Strata DK TTY Port (see 

Figure 16 

on 

Page 130

). Dialing Strings are set using the Maintain 

Customer or Dial DK menus. DIU and Modem Initialization Strings are set from the Options/
System Installation/Communications Setup. (See 

Appendix A – Connecting to Strata DK

 to 

establish communications between the Strata DK and the DKAdmin/DKBackup PC.) 
DKAdmin/DKBackup cannot be used to send or receive customer database information until a 
physical communication path has been established between the Strata DK and the DKAdmin/
DKBackup PC.

1085DK