Toshiba A55 Manuale Utente

188

5.375 x 8.375 ver 2.3

These are some typical problems and recommended 
solutions: 

Make sure the drive tray has closed properly. Press gently 
until it clicks into place.

Open the drive tray and remove the disc. Make sure the drive 
tray is clean. Any dirt or foreign object can interfere with the 
laser beam.

Examine the disc to see whether it is dirty. If necessary, wipe 
it with a clean damp cloth dipped in water or a neutral 
cleaner.

Replace the disc in the tray. Make sure it is lying flat, label 
side uppermost. Press the disc down until it locks on the 
spindle. Close the drive tray carefully, making sure it has shut 
completely.

Make sure the computer is connected to a power source and 
turned on. The DVD-ROM or multi-function drive eject 
mechanism requires power to operate.

To remove a disc without turning on the computer, use a 
narrow object, such as a straightened paper clip, to press the 
manual eject button. This button is in the small hole next to 
the disc eject button on the front of the DVD or multi-
function drive.

If the problem is with an application CD-ROM, refer to the 
software’s documentation and check that the hardware 
configuration meets the program’s needs.