Adtran 604 Manuale Utente
Total Access 600 Series System Manual
Section 5 DLP-4
61200624L1-1B
© 2004 ADTRAN, Inc.
193
From the same computer used in the previous step, Telnet to the Total Access 6XX and verify that the
Telnet session is properly opened (see DLP-5, Connecting to the Unit Using Telnet). Once the Telnet
session is established, press <
Telnet session is properly opened (see DLP-5, Connecting to the Unit Using Telnet). Once the Telnet
session is established, press <
CTRL+L
> to logout and close the session.
Refer to the documentation of the computer system if you are unsure how to perform a
Telnet. Most computers running a networked version of Microsoft Windows™ or UNIX
allow a Telnet to be performed by simply typing Telnet <IP Address> at a command line
prompt. Telnet is a utility common on many local area networks that allows remote access
to another computer or piece of equipment.
Telnet. Most computers running a networked version of Microsoft Windows™ or UNIX
allow a Telnet to be performed by simply typing Telnet <IP Address> at a command line
prompt. Telnet is a utility common on many local area networks that allows remote access
to another computer or piece of equipment.