Lucent Technologies 8405 Manuale Utente
28
Last Number Dialed
To automatically redial
the last number you
dialed (up to 24 digits)
(extension, outside
number, or trunk/feature
access code)
the last number you
dialed (up to 24 digits)
(extension, outside
number, or trunk/feature
access code)
1
Press
(while off-hook)
or Dial the Last Number Dialed access code
__________ (while off-hook)
__________ (while off-hook)
•
Number is automatically dialed
Note: Available with a DEFINITY Generic 2 and
with System 85 R2V4 and some R2V3 systems.
Check with your system manager to learn if the
feature is available on your system.
with System 85 R2V4 and some R2V3 systems.
Check with your system manager to learn if the
feature is available on your system.
Limitations on this feature should be noted. Digits
dialed via Abbreviated Dialing, feature dial codes,
authorization codes, and Station Message Detail
Recording (SMDR) account codes are not retained in
memory and must be redialed for each call.
dialed via Abbreviated Dialing, feature dial codes,
authorization codes, and Station Message Detail
Recording (SMDR) account codes are not retained in
memory and must be redialed for each call.
To see the number you
last dialed (you must have
a voice terminal with a
display, and you must be
on-hook)
last dialed (you must have
a voice terminal with a
display, and you must be
on-hook)
1
Press
(while on-hook)
•
Last number dialed is shown on the display screen
Last Dialed
Last Dialed
You can access the Leave Word Calling feature (LWC) and the Cancel Leave Word
Calling feature (CnLWC) with the softkeys only if your voice terminal has a display.
Calling feature (CnLWC) with the softkeys only if your voice terminal has a display.
Leave Word Calling (LWC)
To leave a message after
dialing an extension
(when call is not
answered, or you hear a
coverage or busy tone)
dialing an extension
(when call is not
answered, or you hear a
coverage or busy tone)
1
If you are using an 8405 with a display, press
and then press the softkey below LWC after you
complete dialing
complete dialing
If your 8405 does not have a display, press
any
time after you complete dialing
[confirmation
[confirmation
tone]
•
Message light goes on at the called voice terminal
(if so equipped)
(if so equipped)
Note: If reorder tone is heard, the message is not
stored; try again.
stored; try again.
Menu
LWC