Linksys SPA932 Manuale Utente
Linksys SPA9x2 Phone Administration Guide
Cisco Confidential--First Draft
175
User Tab
SPA9x2 Phone Field Reference
Since two G.723.1/G.726 resources are available per SPA9x2, you should disable the use of
G.729a to guarantee support for two simultaneous G.723/G.726 codecs.
G.729a to guarantee support for two simultaneous G.723/G.726 codecs.
Dial Plan
The default dial plan script for each line is as follows: (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-
9]xxxxxx|xxxxxxxxxxxx.). For more information, see
9]xxxxxx|xxxxxxxxxxxx.). For more information, see
User Tab
This section describes the fields for the following headings on the User tab:
Parameter
Description
Dial Plan
Dial plan script for this line.
The dial plan syntax is expanded in the SPA to allow the
designation of three parameters to be used with a
specific gateway:
designation of three parameters to be used with a
specific gateway:
•
uid – the authentication user-id
•
pwd – the authentication password
•
nat – if this parameter is present, use NAT
mapping
mapping
Each parameter is separated by a semi-colon (;).
Furthermore, it recognizes gw0, gw1, …, gw4 as the
locally configured gateways, where gw0 represents the
local PSTN gateway in the same unit.
locally configured gateways, where gw0 represents the
local PSTN gateway in the same unit.
Example 1:
*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=
xyz
xyz
Example 2:
*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz
Example 3:
[39]11<:@gw0>
Enable IP Dialing
Enable or disable IP dialing.
Defaults to no.