Echo 99944200553 Manuale Utente

1.  Clean ProSweep attachment bristles with water. 

Do not immerse this attachment in water. Water will enter gear 

housing and damage gears, bearings and seals. 

2.  Apply thin coating of oil to metal parts to prevent rust.

3.  Lubricate lower shaft assembly with grease. (Refer to Lubrication 

instructions.)

4.  Store ProSweep attachment in a dry place out of reach of children. 

Do not store attachment with the weight resting on brushes which 

could bend over a long period of time. Store attachment with 

lower shaft housing in a horizontal or vertical position to prevent 

grease loss from open shaft end.

5.  Insert small end of hook into locating hole on attachment shaft.  

6.  Slide plastic cap onto end of attachment shaft. 

Attachment Length ---------------------------------------- 925  mm (36.4 in.)
Attachment Width ----------------------------------------- 598 mm (23.5 in.)
Attachment Height ----------------------------------------- 280 mm 11 in.)
Weight ------------------------------------------------------- 5.1 kg. (11.25 lb.)
Drive Shaft -------------------------------------------------- 6.35 mm (0.25 in.) 
Rotating Direction ----------------------------------------- Towards the operators viewed from the rear
Brushes ------------------------------------------------------ Nylon Bristles 0.7 mm (0.028 in.) Nylon Bristles
Max Sweeping Width ------------------------------------- 590 mm (23.2 in.)
Gear Case Lubrication ------------------------------------ EP "0" or "00" Grease
Gear Reduction Ratio ------------------------------------- 42.75 : 1
Drive Shaft Lubrcation ------------------------------------ POWER BLENDX

TM

Sweeper Operating (RPM) ------------------------------- 210
Engine Wide Open Throttle (RPM) w/attachment ---- 7700-8500