Mitel 5235 IP Phone Manuale Utente

Call Handling 

The 5235 IP Phone supports a maximum of eight held calls at the same time.  

When you place a call on hold, or when another party puts you on hold, the on-hold 
beep reminds you that you are holding or on hold. If the handset is in its cradle, you hear 
the beep through the handsfree speaker. You can turn off this beep, if desired. 

Note:  You cannot change your hold settings while on a call. 

• Press 

HOLD. The associated Line key flashes.  

•  Press the associated flashing Line key. The Line key changes from flashing to lit 

solid. 

• Access 

the 

Feature Configuration page of the Web Configuration (see Accessing 

the Web Configuration Tool on page 6). 

Call Forward redirects incoming calls to your voice mailbox (by default) or to an alternate 
number. Choose from the following Call Forward options: 

•  Call Forward – Always redirects all incoming calls  
•  Call Forward – No Answer redirects calls if you don’t answer after the programmed 

number of rings (1 – 99) 

•  Call Forward – Busy redirects calls when all lines are busy.  

All Call Forward options are OFF by default. You can turn on Call Forward No Answer 
and Call Forward Busy at the same time.  

Note:  You cannot change your Call Forward settings while on a call.  

Note:  To program and enable or disable Call Forward using the Web Configuration 

Tool, access the tool’s Feature Configuration page (see Accessing the Web 
Configuration Tool on page 6).