Panasonic BB-GT1540 Manuale Utente

82

The STATUS indicator 
continues flashing in amber.

L

An IP address may not have been acquired or 
the static IP address is not appropriate. Check 
the base unit’s IP address using the handset:
{

MENU} i {#}{5}{0}{1}

– If necessary, change the base unit’s static 

IP address (page 29).

– If an IP address was not acquired, check 

your network devices’ (router, modem, etc.) 
connections. If the connections are made 
properly but the problem persists, check 
your network devices’ (router, modem, etc.) 
settings.

L

Many installation issues can be resolved by 
resetting all the equipment. First, shut down 
your modem, router, base unit, and computer. 
Then turn the devices back on one at a time in 
this order: modem, router, base unit, 
computer.

L

If you cannot access Internet Web pages 
using your computer, check to see if your 
Internet service provider is having connection 
issues in your area.

L

For more troubleshooting help, visit 
www.joip.com or contact the A service 
provider.

The STATUS indicator flashes 
in amber rapidly although the 
IP address was acquired.

L

Unplug the base unit’s AC adaptor to reset the 
unit, then reconnect the AC adaptor. If the 
STATUS indicator is still flashing in amber 
rapidly, there may be a problem with the base 
unit hardware. Contact Panasonic service 
personnel.

The STATUS indicator lights in 
amber although the Ethernet 
cable is connected properly.

L

The base unit’s IP address may conflict with 
the IP addresses of other devices on your 
local network. Check the base unit’s static IP 
address using the handset: {MENU} i 
{#}{

5}{0}{1}, then check the IP addresses 

of the other devices on your local network. If 
necessary, change the base unit’s static IP 
address (page 29).

GT15xx.book  Page 82  Monday, June 4, 2007  8:52 AM