Panasonic KX-A272 Manuale Utente
6 | Operating Instructions
Placement
To get the best performance from the repeater:
•
Select a raised position (on wall etc), which is well within range of the Base
Unit/Cell Station.
Unit/Cell Station.
•
Avoid positioning the repeater close to objects that will interfere with reception, such
as thick walls, radiators, metal shelving etc.
as thick walls, radiators, metal shelving etc.
•
For maximum distance noise-free operation, place your DECT repeater away from
electrical appliances such as TV, radio, personal computer or other telephone
equipment.
electrical appliances such as TV, radio, personal computer or other telephone
equipment.
•
Keep a minimum distance of 10m between repeaters.
•
If the Green LED flashes - move the repeater closer to the Base Unit/Cell Station or
away from obstructions etc.
away from obstructions etc.
LED Status
Red LED (Indicates special states)
Green LED (Indicates registration / communications states)
On/off/blink specification
Definition
On
Repeater is not assigned to any system
Off
Normal Operation
Slow blinking -
“320ms on / 320ms off”
Manual registration mode
Intermittent blinking
“100ms on / 2.4sec off”
Verification mode (Flashes in time with monitor beep
tone)
tone)
On/off/blink specification
Definition
On
Repeater successfully registered
Off
Repeater de-powered
Slow blinking -
“320ms on / 320ms off”
Registration process ‘searching’ for Cell Station /
unregistered
unregistered
Fast blinking -
“200ms on / 200ms off”
Repeater ID programming mode / Site Survey mode
(PBX application only)
(PBX application only)
QUQX00130YA_01_A 20/1/04 6:40 pm Page 6