Panasonic 524X07801B Manuale Utente
Section 700 - Operation
Chapter 6. DSLT Features
576-13-700
DBS 576 (USA), Revised 6/11/98
215
Operation
To place a call on System Hold:
To retrieve a call placed on System Hold:
To retrieve a held call on a specific trunk:
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-01: Floating Hold by HOLD Key
•
FF1-0-03: Extension COS (Hold Key Operation)
•
FF3: Extension COS
Considerations
•
N/A
Floating Hold
Floating Hold is a type of System Hold that allows you to retrieve a held call from any extension by
dialing the Floating Hold orbit number for the held call.
dialing the Floating Hold orbit number for the held call.
Floating Hold is useful when the intended recipient of a call must be located via a page. The call can
be placed in a Floating Hold “orbit” and that orbit number announced during the page. The paged
party can then pick up the call by dialing the orbit number.
be placed in a Floating Hold “orbit” and that orbit number announced during the page. The paged
party can then pick up the call by dialing the orbit number.
Operation
To place a call on Floating Hold:
Action
Result
1. While on a call, press the HOLD key.
Intercom dial tone
Action
Result
1. Press the HOLD key.
Intercom dial tone
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Enter the Specified Trunk Answer code (default = *0).
3. Enter the trunk number.
Action
Result
1. Press the HOLD key.
Intercom dial tone