Addtron Technology KE1021A Manuale Utente

KE1020A 

The phone should now be connected as in the diagram above. 

Within 30 seconds of being connected to the Internet your Netphone should display “Ready For Calls”. If it does, 

then no other configuration is necessary – you can make calls. If the phone continues to say “Please Wait” or 

“Wait Logon” for more than 30 seconds then it has not been able to connect to the Internet – consult the Problems 

and Solutions section of this guide. 

 

If your service provider has instructed you to configure the Netphone you will need to consult the Setting 

Instructions below. 

 

Note: After you have changed a setting ESC back out of the menu and press SET/OK to save settings when 

prompted to. 

If your Netphone account has been set up, please skip the section ‘5.2.5 Account settings’. 

 

If you need to configure DNS IP 

Press SET/OK to enter the submenu and select ‘DNS1’ by pressing UP and DOWN. 

Press SET/OK to enter setting menu and configure your DNS2. 

 

If a spare DNS is requested, press SET/OK to enter the submenu and select DNS2 by pressing UP and 

DOWN; or you may press SET/OK to enter setting menu and configure your DNS2. 

If the account information has been set up, you may start using as soon as you plug in. 

 

Dynamic IP Users 

PPPoE Users 

Static IP Users 

Account Settings 

Parameter Settings 

KE1020A