AT&T 1070 Manuale Utente

66

Microphone

DTAD FEATURE MENU (1080 only)

The 1080 has a pre-recorded daytime 
announcement, “Thank you for calling our 
company. If you know your party’s extension, you 
may dial it at any time. For a company directory 
please dial 

0. To leave a message please dial 9.” 

You can use this announcement or replace it with 
a recording of your own, using the steps below.

1. Press 

[DTAD] on a system telephone assigned 

as auto attendant.

2. Press 

[ ] or [ ] until you see SYSTEM OGMS. 

Press

 [ENTER].

3. Press 

[ ] or [ ] until you see AA DAY-OGM.

4. Press 

[ ] or [ ] until you see RECORD. Press 

[ENTER].

  Speak facing the telephone from about nine 

inches away. The elapsed time (in seconds) 
shows on the screen when recording. You can 
record an announcement up to 75 seconds 
long. Announcements shorter than three 
seconds long are not recorded.

5. When you are finished recording, press 

[ENTER]. The recorded announcement plays 
back and the screen will show 

PLAYING.

6. Press 

[ENTER] to skip the play back.

   

  After you have played the recording, the 

screen will go back to the 

AA DAY-OGM 

menu.

7. Press

 [DTAD] to exit the DTAD feature menu.

SYSTEM OGMS

 AA DAY-OGM

RECORD                           

SYSTEM OGMS
AA DAY-OGM
RECORDING               00:20
STOP

 NOTE: The answering 

system uses the 
AUTOMATIC MODE 
set on page 39 to 
record system outgoing 
messages. If the 
AUTOMATIC MODE 
is 

SPEAKERPHONE 

(default), face the 
microphone (the 
MIC opening) on the 
telephone to record 
system outgoing 
announcements. If the 
AUTOMATIC MODE 
is 

HEADSET, use the 

headset microphone to 
record system outgoing 
announcements

.