Garmin Edge 605 Manuale Utente

U

SinG

 a

cceSSorieS

5.  Press the 

 button on 

the gSC 10. The LEd turns 

red, then green. Pedal to test 

the sensor alignment. The 

red LEd blinks each time the 

crank arm passes the sensor, 

and the green LEd blinks each 

time the wheel magnet passes 

the sensor arm.

note: The LED blinks 

for the first 60 passes after 

a reset. Press 

 again 

if you require additional 

passes.

6.  When everything is aligned 

and working correctly, tighten 

the cable ties, sensor arm, and 

spoke magnet.

Cadence is your rate of pedaling or 

“spinning” measured by the number 

of revolutions of the crank arm per 

minute (rpm). There are two sensors 

on the GSC 10: one for cadence and 

one for speed. 
For information about cadence alerts, 

For information about speed zones, 

For GSC 10 battery information, see