Panasonic PT-AE8000U Manuale Utente

76 - ENGLISH

You can move the frame area horizontally, such as 

aligning the right or left frame edge to the screen 

edge.

For example, when projecting an overscanned 16:9 

projection area at a 4:3 aspect ratio on a 4:3 aspect 

screen, you can adjust the horizontal discrepancy 

between the screen position and the video display 

position.

 

16:9 projection area

4:3 screen

4:3 video display position

You can move the frame area vertically, such as aligning 

the top or bottom frame edge to the screen edge.

For example, when projecting an overscanned 16:9 

projection area at a 2.35:1 cinema scope screen 

movie on a 2.35:1 size cinema scope screen, you can 

adjust the vertical discrepancy between the screen 

position and the video display position.

2.35:1 cinema scope screen 

size video display position

16:9 projection area

2.35:1 cinema scope screen

You can place a blank (mask) area in the left side edge on 

the screen.

 

z

Setting range: 0 to 70 

You can place a blank (mask) area in the right side edge on 

the screen.

 

z

Setting range: 0 to 70

You can place a blank (mask) area in the upper side edge 

on the screen.

 

z

Setting range: 0 to 70

You can place a blank (mask) area in the lower side edge 

on the screen.

 

z

Setting range: 0 to 70

 

z

If it is set to [0], each masking function will be invalid.

 

z

The [MASKING AREA] function will be invalid when 

adjusting the [COLOR MANAGEMENT] or [SPLIT 

ADJUST] settings, when displaying the [TEST PATTERN] 

or [WAVEFORM MONITOR], or when no signal is 

detected.

 

z

During the display of 3D images, you cannot use [LEFT 

MASKING AREA], [RIGHT MASKING AREA], [UPPER 

MASKING AREA], [LOWER MASKING AREA].

You can set whether to show or hide the execution 

message during switching of lens settings.

Show the execution message

Hide the execution message