Samsung HCM653W Manuale Utente
2
C
HAPTER
T
WO
: I
NSTALLATION
2.8
Connecting a DTV Set-Top Box (480p, 1080i)
When switching to the DTV mode, either 480p or 1080i format is automatically selected
according to the input signal.
Note: Only 480p and 1080i formats are supported.
according to the input signal.
Note: Only 480p and 1080i formats are supported.
1
Connect a set of audio cables between
the DTV Set-Top Box audio in jacks on
the TV and the AUDIO OUT jacks on the
DTV Set-Top box.
the DTV Set-Top Box audio in jacks on
the TV and the AUDIO OUT jacks on the
DTV Set-Top box.
2
To enable Component video viewing,
connect video cables between the Y, P
connect video cables between the Y, P
B
,
and P
R
inputs on the TV and Y, P
B
, and P
R
(or Y, C
B
, C
R
) outputs on the DTV Set-Top
box.
Note: For an explanation of
Component video, see your DTV Set-
top box’s owner’s instruction.
Component video, see your DTV Set-
top box’s owner’s instruction.
Connecting Surround Speakers
(HCL552W/HCL652W/HCL473W/HCM553W/HCM653W only)
1
Connect inputs of an amplifier to the
SURROUND OUT outputs of the TV.
Then connect the surround speakers to
your amp.
SURROUND OUT outputs of the TV.
Then connect the surround speakers to
your amp.
I
N S TA L L AT I O N
Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV may
be different, depending on the model.
be different, depending on the model.
01509D(E)-CHAPTER 2 2004/10/19 09:18 AM Page 8