Epson EH-DM3 Manuale Utente

66

This section describes maintenance tasks such as cleaning the unit and replacing consumable parts.

When dust builds up on the air filter or the air intake 

vent, or the message “The unit is overheating. Make sure 

nothing is blocking the air vent, and clean or replace the 

air filter.” is displayed, remove any dust from the air 

filter and the air intake vent using a vacuum cleaner.

Before starting the maintenance, unplug the power cable from the electrical outlet.

• If dust collects on the air filter or the air intake vent it can 

cause the internal temperature of the unit to rise, and this 

can lead to operation problems and a shortening of the 

service life of optical parts. It is recommended that you 

clean these parts at least once every three months. Clean 

them more often than this if the unit is used in particularly 

dusty environments.

• Do not rinse the air filter in water. Do not use detergents or 

solvents.

Clean the surface by wiping it gently with a soft cloth.

If the unit is particularly dirty, moisten a cloth with 

water containing a small amount of neutral detergent, 

firmly wring the cloth dry, wipe the unit softly with the 

cloth to remove stains, and then wipe it again with a 

soft, dry cloth.

Do not use volatile substances such as wax, alcohol, or thinner 

to clean the unit's surface. These can cause the unit to warp 

and make the coating finish peel off.

Use a commercially available cloth for cleaning glasses 

to gently wipe the lens.

Do not rub the lens with harsh materials or subject the lens to 

impact shock, as it is fragile.

Cleaning