Polycom DOC2702A Manuale Utente
Appendix J-Restoring Defaults
Polycom, Inc.
J-3
2
Power the MCU Off and then On.
3
Login using http://<Control Unit IP Address>.
Comprehensive Restore to Factory Defaults
Inserting a USB key containing a file named RestoreToFactoryDefault.txt and a
lan.cfg file will cause the MCU to exit Secure Mode and perform a Comprehensive Restore to
lan.cfg file will cause the MCU to exit Secure Mode and perform a Comprehensive Restore to
Factory Defaults.
The Comprehensive Restore to Factory Defaults deletes the following files:
•
The Comprehensive Restore to Factory Defaults deletes the following files:
•
CDR
•
Address Book
•
Log Files
•
Faults
•
Dump Files
•
Notes
In addition all the conferencing entities are deleted:
•
•
Entry Queues
•
Profiles
•
Meeting Rooms
•
IVR Services
•
Default Network IP Service
•
Log Files
•
CFS license information
•
Management Network Service
The MCU is restored to the settings it had when shipped from the factory. The Product
Activation Key is required to re-configure the Management Network Service during the First
Entry Configuration.
Comprehensive Restore to Factory Defaults Procedure
To perform a Comprehensive Restore to Factory Defaults:
Restoring the MCU to Factory Defaults consists of the following procedures:
A Backup Configuration Files
Restoring the MCU to Factory Defaults consists of the following procedures:
A Backup Configuration Files
—
These files will be used to restore the system in Procedure C.
B Restore to Factory Defaults
—
Restart the system with a USB device containing a file named
RestoreToFactoryDefault.txt and a lan.cfg file plugged into the USB port.
C Optional. Restore the System Configuration From the Backup
—
Apply the backup file created in procedure A.
—
Restart the MCU.
(If the MCU is unresponsive after these procedures a further restart may be necessary.)