Roland VG-99 Manuale Utente

 

1–50

Setting up the VG-99 in certain positions 
may make the display difficult to read. If 
this occurs, adjust the display contrast (legi-
bility).

 

DIR.PATCH 1–5

This sets the desired [DIRECT PATCH 1]–
[DIRECT PATCH 5].

 

AUTO

This automatically determines the GK con-
nection and switches the internal settings.
When the GK connection is in use, the GUI-
TAR INPUT connection is disabled.

OFF

Use this setting if you normally use the con-
nection for GUITAR INPUT.

ON

Use this setting if you are normally using a 
GK connection.

 

This selects the function assigned to GK VOL.

 

For more on the functions assigned, refer to the GK 
VOL column in 

 

 

This selects the functions assigned to GK S1, S2.

 

For more on the functions assigned, refer to the GK S1, 
S2 column in 

 

 

This setting allows you to select whether one GK SETTING is used 
globally for the entire VG-99 or if different GK SETTINGS are speci-
fied for each patch individually.

SYSTEM

The GK SETTING set here is used globally 
for the entire VG-99. This is the default fac-
tory setting.

PATCH

GK SETTINGS are specified for each patch 
individually. Carry out the Write procedure 
after making changes to the settings in each 
patch. Use this setting when performing 
with multiple guitars, switching the instru-
ment depending on the patch used.

 

1–10

This selects the GK SETTING to be set.

 

This sets the name for the GK SETTING (up to eight characters).

INSERT

Insert a space at the cursor location.

DELETE

Delete a character. The characters that fol-
low get shifted to the left.

SPACE

Input a space at the cursor location.

A0!

Switch between uppercase letters, numbers, 
and characters.

A<=>a

Switch between uppercase letters and low-
ercase letters.

VG-99_e.book 166 ページ ２００７年７月５日　木曜日　午前９時２２分