Roland VG-99 Manuale Utente
28
Chapter 2 Creating Sounds
10.
If you want to save the edited settings,
perform the Write procedure (p. 38).
perform the Write procedure (p. 38).
*
If you do not want to save, press [EXIT] to return to the Play screen.
*
Although parameter assignments set with Control Assign are saved
with the Write procedure, the BEND parameter values in Step 8 are
not saved.
For detailed information on all the parameters, refer to
1.
Press [ALTERNATE TUNING].
2.
Press PAGE [
] to go to Page 2.
fig.01-060d
3.
Switch the function on or off with the F1 or F4
knob.
knob.
*
You can make separate 12 STRING settings for COSM GUITAR
[A] and COSM GUITAR [B].
4.
If making detailed parameter settings for 12
STRINGS, press [F1] (12STR) or [F4] (12STR).
STRINGS, press [F1] (12STR) or [F4] (12STR).
5.
Press PAGE [
] [
] to display the parameter
you want to set.
fig.01-060d
6.
Set the desired parameter with [F1]–[F6] or
with the F1–F6 knobs.
with the F1–F6 knobs.
7.
If you want to save the edited settings,
perform the Write procedure (p. 38).
perform the Write procedure (p. 38).
*
If you do not want to save, press [EXIT] to return to the Play screen.
For detailed information on all the parameters, refer to
Example of BEND Parameter Settings
By making the parameter settings shown below, you can
achieve a string bender-like effect which smoothly raises the
pitch of the second string a whole step.
achieve a string bender-like effect which smoothly raises the
pitch of the second string a whole step.
Values Set for the Alternate Tuning Parameter
[ALT TUNING]
AB LINK = ON
BEND SW = ON
BEND TUNING 1st = E 0
BEND TUNING 2nd = D
+2
BEND TUNING 3rd = G 0
BEND TUNING 4th = D 0
BEND TUNING 5th = A 0
BEND TUNING 6th = E 0
Values Set for the Control Assign Parameter
[CONTROL ASSIGN]
SOURCE = FC-300 EXP 1 or RIBBON POS
(Set the RIBBON CONTROLLER’s ASSIGNABLE
setting to ON.)
setting to ON.)
SW = ON
TARGET PARAMETER = ALT TUNE/[A]BEND/BEND
Setting 12-STRING
VG-99_e.book 28 ページ ２００７年７月５日 木曜日 午前９時２２分