Roland VG-99 Manuale Utente
53
Chapter 5 Using the VG-99 in Combination with an FC-300
Chapter 5
This sets the timing at which patches are switched when you press
[
] [
] pedals on the FC-300.
1.
Press [SYSTEM].
2.
Press PAGE [
] to display Page 1.
3.
Press [F5] (FC-300).
4.
Set BANK CHANGE with [F2] (SELECT) or with
the F2 knob.
the F2 knob.
You can use the FC-300’s number pedals to switch the Tuner
function on and off.
function on and off.
*
The Quick Tuner function is enabled only in the Play screen.
*
The Quick Tuner function is enabled only when the FC-300’s
MODE is set to SYS EX.
1.
Press [SYSTEM].
2.
Press PAGE [
] to display Page 1.
3.
Press [F5] (FC-300).
4.
Set QUICK TUNER with [F3] (SELECT) or with
the F3 knob.
the F3 knob.
Setting the Operation When
Patches Are Switched
Patches Are Switched
Available
Settings
Settings
Description
IMMEDIATE
The patch changes immediately when the FC-300’s
[
] [
] pedals are pressed.
WAIT NUM
Even after the FC-300’s [
] [
] pedals are
pressed, the patch does not change until the NUM-
BER is set.
BER is set.
Activating the VG-99’s
Tuner from the FC-300
(QUICK TUNER)
Tuner from the FC-300
(QUICK TUNER)
Available Settings Description
OFF
The QUICK TUNER function is not opera-
tional.
tional.
ON
The QUICK TUNER function is operational.
The TUNER function is alternately switched
on and off each time the currently selected
number pedal is pressed.
The TUNER function is alternately switched
on and off each time the currently selected
number pedal is pressed.
VG-99_e.book 53 ページ 2007年7月5日 木曜日 午前9時22分