Roland VG-99 Manuale Utente
82
Chapter 8 Other Functions
You can assign parameters to the F1–F6 knobs to control the
parameters as you play.
parameters as you play.
Additionally, you can check (display) the assigned parameters by
pressing [F1]–[F6].
pressing [F1]–[F6].
1.
Press [CONTROL ASSIGN]
2.
Press PAGE [
] to go to the last page.
3.
Press [F6] (F1–F6) to enter the DIRECT EDIT
screen.
screen.
The DIRECT EDIT screen appears.
4.
Press Page [
] [
] to go to the page for the
knob you want to set.
5.
Use the [F1]–[F6] or F1–F6 knobs to select the
parameters you want to assign to the knob.
parameters you want to assign to the knob.
6.
If you want to save the edited settings,
perform the Write procedure (p. 38).
perform the Write procedure (p. 38).
*
If not saving the settings, press [EXIT] to return to the Play screen.
These settings are made when parameters are to be controlled with
the GK-3 VOLUME knob or DOWN/S1, UP/S2 switches, the VG-
99’s CONTROL buttons, an external pedal or other connected
controller, or a connected MIDI device.
the GK-3 VOLUME knob or DOWN/S1, UP/S2 switches, the VG-
99’s CONTROL buttons, an external pedal or other connected
controller, or a connected MIDI device.
In addition to settings already assigned to controllers, the VG-99 also
features sixteen prepared general-purpose control assigns that let
you freely assign settings to controllers as you like.
features sixteen prepared general-purpose control assigns that let
you freely assign settings to controllers as you like.
*
If you intend to control the parameters of effects and the like, be sure to
set the effect to ON beforehand.
set the effect to ON beforehand.
*
For more detailed information on the parameters, refer to
*
Enabling the settings requires setting each of the controller
assignments to ASSIGNABLE in the SYSTEM CONTROL ASSIGN
screen. For detailed information, refer to
assignments to ASSIGNABLE in the SYSTEM CONTROL ASSIGN
screen. For detailed information, refer to
1.
Press [CONTROL ASSIGN]
2.
Select the controller you want to set with
PAGE [
] [
] and [F1]–[F6].
The various controllers’ setting screens appear.
*
The following section describes the controllers you can set.
Changing the Sounds with
the Knobs as You Play
(DIRECT EDIT)
the Knobs as You Play
(DIRECT EDIT)
Using the Switches, Pedals,
and MIDI to Control the
Sounds (CONTROL ASSIGN)
and MIDI to Control the
Sounds (CONTROL ASSIGN)
Displayed
screen
screen
Controller
GK VOL
GK VOL
Settings for the volume knob on the
GK-3.
GK-3.
S1, S2
GK S1, S2
Settings for the switches on the
GK-3.
GK-3.
CTL1
CONTROL1
Settings for the CONTROL 1 But-
ton on the VG-99’s top panel.
ton on the VG-99’s top panel.
CTL2
CONTROL2
Settings for the CONTROL 2 But-
ton on the VG-99’s top panel.
ton on the VG-99’s top panel.
VG-99_e.book 82 ページ ２００７年７月５日 木曜日 午前９時２２分