Samsung HTF6500WZA Manuale Utente
English
17
|
03
Connections
Connecting to TV/External Devices
HDMI OUT
HDMI IN
1
2
LAN
AUX IN
FM ANT
OPTICAL
DIGITAL
AUDIO IN
L
R
OPTICAL OUT
AUDIO OUT
HDMI OUT
HDMI IN
1
2
LAN
POWER
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT L
FRONT R
IMPEDANCE : 3
AUX IN
FM ANT
OPTICAL
DIGITAL
AUDIO IN
L
R
HDMI OUT
HDMI IN
Method 1
Method 2
Method 3
R
Red
W
White
External Devices
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your
TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control
and select HDMI as the external source of the TV.
TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control
and select HDMI as the external source of the TV.
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the
mode changes in this order : BD/DVD D. IN AUX HDMI1 HDMI2 FM BT
mode changes in this order : BD/DVD D. IN AUX HDMI1 HDMI2 FM BT
Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your
digital device.
digital device.
Select the HDMI1 or HDMI2 mode.
Method 2 AUX IN : Connecting an External Analog Component
Using a RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the
external analog component.
external analog component.
Select the AUX mode.
•
Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 3 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-
Top-Boxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device.
Select the D. IN mode.
Top-Boxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device.
Select the D. IN mode.
| NOTES |
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported
HT-F6500W_ZA_0124.indd 17
HT-F6500W_ZA_0124.indd 17
2013-01-24 오후 4:58:58
2013-01-24 오후 4:58:58