Planar EL552.256-Q2 Manuale Utente
EL552.256-Q2 Operations Manual (OM410-00)
11
Mechanical Specifications
Table 7. Mechanical Specifications
Display External Dimensions
millimeters (inches)
Height
w/o mounting tabs
Width
Depth*
w/o mounting tabs
Width
Depth*
109.73 (4.32)
98.68 (3.885)
176.78 (6.96)
16.26 (0.64)
98.68 (3.885)
176.78 (6.96)
16.26 (0.64)
DC/DC Converter Dimensions
Height
Width
Length
Width
Length
19.05 (0.750)
50.8 (2.0)
133.35 (5.250)
50.8 (2.0)
133.35 (5.250)
Display Weight
262 grams (0.6 lbs.), nominal
DC/DC Converter Weight
9.33 grams (0.187 lbs.)
Fill Factor
59.2% nominal
Active Area
millimeters (inches)
Width
Height
Diagonal
Height
Diagonal
67.564 (2.660)
145.745 (5.738)
6.33"
145.745 (5.738)
6.33"
Pixel Size
millimeters (inches)
Width
Height
Height
0.203 (0.008)
0.203 (0.008)
0.203 (0.008)
Pixel Pitch
millimeters (inches)
Width
Height
Height
0.264 (0.0104)
0.264 (0.0104)
0.264 (0.0104)
* Without DC/DC Converter
Component Envelope
The component envelope shown in Figure 5 illustrates the distance components
extend behind the display. Tall components do not necessarily fill this area. Planar
reserves the right to relocate components within the constraints of the component
envelope without prior customer notification. For this reason, Planar advises users
to design enclosure components to be outside the component envelope.
extend behind the display. Tall components do not necessarily fill this area. Planar
reserves the right to relocate components within the constraints of the component
envelope without prior customer notification. For this reason, Planar advises users
to design enclosure components to be outside the component envelope.
An air gap of at least 5 mm is recommended to dissipate heat from display
components. Device designers will need to consider their specific system
requirements to determine the necessary spacing.
components. Device designers will need to consider their specific system
requirements to determine the necessary spacing.