Lucent Technologies 4.1 Manuale Utente
Programming
To program a Call Coverage button:
1 .
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2 .
Enter the number of the extension to be programmed with this feature.
3 .
Press a programmable button, preferably a button with lights.
4 .
At this point, you can:
■
■
■
Press [
Feature
] [
2
] [
0
], or
Press [
Feature
] [
2
] [
0
] and the number of the originating extension, or
Press [
Feature
] [
2
] [
0
], the number of the originating extension, and the
number of the covering extension.
5 .
Program another button for this extension or exit programming mode.
Using
System Phone
To send calls for coverage manually:
1 .
Press [
Feature
] [
2
] [
0
].
2 .
Dial your extension number.
3 .
Dial the extension number of the covering extension.
To remove Call Coverage manually:
1 .
Press [
Feature
] [
2
] [
0
].
2 .
Dial your extension number twice.
To send calls for coverage using the programmed button:
1 .
Press the programmed button.
If an originating extension and a covering extension were programmed on
the button, Call Coverage is activated (on a button with lights, the green
light is on). Skip Steps 2 and 3.
If an originating extension and a covering extension were programmed on
the button, Call Coverage is activated (on a button with lights, the green
light is on). Skip Steps 2 and 3.
2 .
If no originating extension was programmed, dial your extension number.
3 .
If no covering extension was programmed, dial the extension number of the
covering extension.
Call Coverage is activated (on a button with lights, the green light is on).
To remove Call Coverage using the programmed button:
1 .
Press the programmed button.
If an originating extension and a covering extension were programmed on
the button, Call Coverage is deactivated (on a button with lights, the green
light is off). Skip Steps 2 and 3.
the button, Call Coverage is deactivated (on a button with lights, the green
light is off). Skip Steps 2 and 3.
2 .
If no originating extension was programmed, dial your extension number.
3 .
If no covering extension was programmed, dial your extension number again.
Call Coverage is deactivated (on a button with lights, the green light is off).
Call Coverage is deactivated (on a button with lights, the green light is off).
5-38
Call Coverage (F20,XX,XX)