Lucent Technologies 4.1 Manuale Utente
Programming
To assign a name to an extension:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2.
Enter the number of the extension to be programmed. For example, to
program extension 12, press [
program extension 12, press [
1
] [
2
].
3.
Press left [
Intercom
]. For extension 12, a display similar to the following appears:
12 Enter Extension Name
If a name was assigned previously to this extension, that name displays
instead.
instead.
4.
Enter the two-digit code for each character you want to enter. (See Table 5-1
for codes.) For example, to enter the name Andy, press [
for codes.) For example, to enter the name Andy, press [
2
][
1
] [
6
][
2
] [
3
][
1
]
[
9
][
3
]. A display similar to the following appears:
12 ANDY
5.
If you make a mistake, you can press [
Mic/HFAI
] to clear the display. Repeat
Step 4 to enter the correct name.
6.
Program a button for this extension or exit programming mode.
5-86
Extension Name Display