Cannon 10 STX TS Manuale Utente

 

www.cannondownriggers.com 

Getting Started 

Manual Descent: Fast or Slow  
 

By turning the clutch knob gently clockwise (toward 

the boom), you can let your trolling weight descend as 
fast or as slowly as you wish. Turning the knob counter-
clockwise (away from the boom) stops the weight. This 
gives you control to let it plunge rapidly or sink slowly to 
a predetermined trolling depth. With multiple downrig-
gers, you could start all your weights creeping down, 
one at a time, and then stop them each in turn. 

 

Powered Descent: One speed fits all. 
 

Hold the toggle switch down until the weight 

reaches the desired depth and release. The motor will 
stop when switch is released or moved to the off posi-
tion.  

 

Raising the Weight  
 

Push the toggle switch up momentarily and release. 

The weight will rise until it reaches the surface and then 
automatically stop. 
 

If you want to raise the weight farther push the tog-

gle switch up and hold until the weight reaches the de-
sired position, then release. 
 

To stop the weight during ascent, push the toggle 

switch down momentarily (approximately 1 second). 
 
NOTE: If your reel continues to slip no matter how hard 
you tighten the brake adjust knob. Refer to the Trouble-
shooting section of this booklet. 
 
CAUTION: The brake adjust knob (clutch) should be 
adjusted so that it is tight enough to hold the weight and 
the lure at the speed you are trolling. Over-tightening 
may cause damage to your downrigger when weight 
hangs up on bottom structure or other obstacles.