Motorola T5400 Manuale Utente
15
T
a
lking an
d Listening
Channel
•
•
With radio On, press
\
, Current Channel will begin to flash.
•
Use
[
and
]
to change Channel while flashing.
•
Press
M
to set new Channel.
Interference Eliminator Code (T5400 Only)
The interference eliminator codes help minimize interference by
providing you with a choice of code combinations.
•
The interference eliminator codes help minimize interference by
providing you with a choice of code combinations.
•
To set the code, press
\
until the code display begins to blink.
•
Then press
[
or
]
to set the code.
•
Press
M
to save the code setting.
You must set the Interference Eliminator Code to 0 on a T5400 to communicate with
a T5300.
a T5300.
You can specify a different code for each channel. To set a channel and code
combination, press
combination, press
\
and then press
[
or
]
to select the channel. Press
\
again and then press
[
or
]
to select a code. Press
M
to exit the menu and to
save the channel and code combination. To set another channel and code
combination, repeat these steps.
combination, repeat these steps.
Volume
•
•
Rotate
P
while holding down
Q
until you reach a comfortable listening level.
•
Rotate
P
clockwise to increase and counter-clockwise to decrease volume.
6864110r09o.book Page 15 Friday, December 21, 2001 12:04 PM