Motorola xpr 6500 Manuale Utente
Advanced Features
English
40
NOTE: If you press the PTT button during hot mic, and
continue to press it after the hot mic duration expires,
the radio continues to transmit until you release the
PTT button.
the radio continues to transmit until you release the
PTT button.
Procedure:
1
Press the programmed Emergency button.
2
The display shows Sending Alarm. The LED lights up solid
green and the Emergency icon is displayed.
green and the Emergency icon is displayed.
3
Once the display shows Emergency Alarm Successful,
speak clearly into the microphone. When hot mic has been
enabled, the radio automatically transmits without a PTT
press until the hot mic duration expires.
speak clearly into the microphone. When hot mic has been
enabled, the radio automatically transmits without a PTT
press until the hot mic duration expires.
4
While transmitting, the LED lights up solid green and the
Emergency icon appears on the display.
Emergency icon appears on the display.
5
Once the hot mic duration expires, the radio automatically
stops transmitting. To transmit again, press the PTT button.
stops transmitting. To transmit again, press the PTT button.
If your radio is set to Silent, it will not display any audio or visual
indicators during Emergency mode, or receive any response
from the target radio, until the programmed hot mic transmission
period is over, and you press the PTT button.
indicators during Emergency mode, or receive any response
from the target radio, until the programmed hot mic transmission
period is over, and you press the PTT button.
If your radio is set to Silent with Voice, it will not display any
audio or visual indicators during Emergency mode when you
are making the call with hot mic, or when the target radio
responds after the programmed hot mic transmission period is
audio or visual indicators during Emergency mode when you
are making the call with hot mic, or when the target radio
responds after the programmed hot mic transmission period is
over. The indicators will only appear when you press the PTT
button.
button.
NOTE: If the Emergency Alarm request fails, the radio returns
to the Home screen.
Reinitiating an Emergency Mode
There are two instances where this can happen:
•
You change the channel while the radio is in Emergency
mode. This exits the Emergency mode. If Emergency Alarm is
mode. This exits the Emergency mode. If Emergency Alarm is
enabled on this new channel, the radio reinitiates Emergency.
•
You press the programmed Emergency button during an
Emergency initiation/transmission state. This causes the
Emergency initiation/transmission state. This causes the
radio to exit this state, and to reinitiate Emergency.
Exiting Emergency Mode
Your radio exits Emergency mode when one of the following
occurs:
occurs:
•
Emergency Alarm acknowledgement is received (for
Emergency Alarm only), OR
Emergency Alarm only), OR
•
All retries to send the alarm have been exhausted, OR
•
The programmed Emergency button is long pressed.
NOTE: If your radio is powered off, it exits the Emergency
mode. The radio will not reinitiate the Emergency
mode automatically when it is turned on again.
mode automatically when it is turned on again.
NAG-LACR-EMEA.book Page 40 Monday, April 28, 2008 4:59 PM