Motorola XTS 3000 Manuale Utente

2.

Talk and listen as usual.

3.

When the dynamic regrouping is cancelled by the dispatcher, the radio 
will automatically return to the present knob/switch zone and/or 
channel position.

This feature allows you to notify the dispatcher that you 
want a new dynamic-regrouping assignment.

1.

Press the Reprogram Request Button (if 
programmed, see page 2).

2.

The reprogram request is automatically sent to the 
dispatcher.

3a. If you hear one beep, press the PTT 

Switch to resend the reprogram 
request again.

If the dispatcher fails to
acknowledge the reprogram 

request within six seconds, a low-
pitched alert tone sounds. Try again.

The dispatcher may classify regrouped radios into either of two categories: 
select enabled or select disabled.

•

Select-enabled radios are free to make channel changes to any available 
channel, including the dynamic-regrouping channel.

•

Select-disabled radios cannot change channels since the dispatcher has 
specifically chosen to force the radio to remain on the dynamic-
regrouping channel.

The scan, telephone call, or Private Conversation call feature 

cannot be selected while your radio is select disabled.

3b. If you hear five beeps, 

the reprogram request 
was acknowledged by the 
dispatcher.

Model I Book  Page 26  Wednesday, August 14, 1996  8:51 AM