Motorola XTNID Manuale Utente

 

To enter ‘Programming Mode’, press and hold 
both the PTT button and the SB1 button 
simultaneously for three seconds, while turning 
ON the radio. A unique tone will sound, 
indicating that the radio has entered 
’Programming Mode’ and the radio LED will 
blink a green heartbeat. Once the radio enters 
the ‘Programming Mode’, which defaults to 
‘Idle’ Programming Mode, the radio LED

 

will be 

blinking green heartbeat. 
Whenever you enter ’Programming Mode’ the 
PROG icon will be displayed and the current 
channel aliasing name will be blinking to 
indicate that you can select the channel you 
want to program. You can scroll up/down to 

select the different channels by pressing the 

/

 buttons. 

In ’Programming Mode’ your radio is capable 
of setting values for each channel by moving 
between the different programming modes 
available: Frequencies, CTCSS/DPL codes 
(Interference Eliminator Code), Scramble, 
Bandwidth, Maximum Channels, Call Tone, 
Microphone Gain and Scan.

• To move along the different Programming 

Selection Modes without saving changes, 
short press the PTT or MENU buttons.

• To save changes, long press the PTT 

button. The radio will return to ’Idle’