Motorola HT1250LS+ Manuale Utente
48
English
PASSPORT
SI
GNAL
ING
Sending a Call Alert using the One-Touch
Button
Button
5
Press the PTT button to send the Call Alert.
•
While the Call Alert is being established
the
the
F
blinks and the LED indicator flashes
red momentarily.
6
Once the Call Alert is
received and
acknowledged by the
target radio, the
received and
acknowledged by the
target radio, the
F
displays solid and
you see:
you see:
Notes:
•
If the Call Alert cannot be established,
you see:
for 5 seconds. The LED indicator turns off.
•
If all channels are busy while attempting a
Call Alert,
Call Alert,
you see:
Acknowledge
No Acknowledge
System Busy
and will hear a delayed busy tone as long
as the PTT button is pressed.
as the PTT button is pressed.
If the PTT button is kept pressed and the
system frees up a channel, the radio auto-
matically attempts to re-establish the call.
system frees up a channel, the radio auto-
matically attempts to re-establish the call.
•
(
to end the Call Alert and revert to
talkgroup dispatch, or press the prepro-
grammed Call Alert button. You can then
manually re-initiate the call. (See Step 1.)
grammed Call Alert button. You can then
manually re-initiate the call. (See Step 1.)
7
(
to end the Call Alert.
1
Press and hold the preprogrammed One-
touch button.
touch button.
•
The LED indicator lights steady yellow.
•
The display shows
F
and the prepro-
grammed alias or ID is displayed.
2
The Call Alert is sent automatically.
•
The LED indicator lights steady red.
Note:
Your radio sounds a continuous tone
(if programmed by your dealer).
(if programmed by your dealer).