Motorola xpr6350 Manuale Utente
Advanced Features
English
18
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, do one of the
following:
To restore the deleted nuisance channel, do one of the
following:
•
Power the radio off and powering it on again, OR
•
Stop and restart a scan via the programmed Scan button, OR
•
Change the channel via the Channel Selector Knob.
Call Indicator Settings
You can turn on or off the ringing tones for a received Private
Call (see Turning Radio Tones/Alerts On or Off on page 24).
Call (see Turning Radio Tones/Alerts On or Off on page 24).
Escalating Alarm Tone Volume
Your radio can be programmed by your dealer to continually
alert you when a radio call remains unanswered. This is done
by automatically increasing the alarm tone volume over time.
alert you when a radio call remains unanswered. This is done
by automatically increasing the alarm tone volume over time.
This feature is known as Escalert.
Call Alert Operation
Call Alert paging enables you to alert a specific radio user to call
you back when they are able to do so. This feature is accessible
via a programmed One Touch Call button.
you back when they are able to do so. This feature is accessible
via a programmed One Touch Call button.
Receiving and Acknowledging a Call Alert
Procedure:
When you receive a Call Alert page:
When you receive a Call Alert page:
1
You hear a repetitive tone. The LED blinks yellow.
2
Press and release the PTT button to acknowledge the alert.
Making a Call Alert with the One Touch Call
Button
Procedure:
1
Press the programmed One Touch Call button to make a
Call Alert to the predefined ID.
Call Alert to the predefined ID.
2
The LED lights up solid green when your radio is sending
the Call Alert.
the Call Alert.
3
If the Call Alert acknowledgement is received, two chirps
sounds.
OR
If the Call Alert acknowledgement is not received, a low-
pitch tone sounds.
sounds.
OR
If the Call Alert acknowledgement is not received, a low-
pitch tone sounds.
NAG-LACR-EMEA.book Page 18 Wednesday, April 30, 2008 5:11 PM