Motorola XPR 4380 Manuale Utente
Advanced Features
English
21
Deleting a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed a “nuisance” channel), you can temporarily remove the
unwanted channel from the scan list.
(termed a “nuisance” channel), you can temporarily remove the
unwanted channel from the scan list.
This capability does not apply to the channel designated as the
Selected Channel.
Selected Channel.
Procedure:
1
When your radio “locks on to” an unwanted or nuisance
channel, press the programmed Nuisance Channel Delete
button until you hear a tone.
channel, press the programmed Nuisance Channel Delete
button until you hear a tone.
2
Release the Nuisance Channel Delete button. The
nuisance channel is deleted.
nuisance channel is deleted.
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, do one of the
following:
To restore the deleted nuisance channel, do one of the
following:
•
Turn the radio off and power it on again, OR
•
Stop and restart a scan via the programmed Scan button, OR
•
Change the channel via the Channel Rocker.
Call Indicator Settings
You can turn on or off the ringing tones for a received Private
Call (see Turning Radio Tones/Alerts On or Off on page 32).
Call (see Turning Radio Tones/Alerts On or Off on page 32).
Escalating Alarm Tone Volume
Your radio can be programmed by your dealer to continually
alert you when a radio call remains unanswered. This is done
by automatically increasing the alarm tone volume over time.
alert you when a radio call remains unanswered. This is done
by automatically increasing the alarm tone volume over time.
This feature is known as Escalert.
Call Alert Operation
Call Alert paging enables you to alert a specific radio user to call
you back when they are able to do so.
This feature is accessible via a programmed One Touch
Access button.
you back when they are able to do so.
This feature is accessible via a programmed One Touch
Access button.
Receiving and Responding to a Call Alert
Procedure:
When you receive a Call Alert page:
When you receive a Call Alert page:
1
You hear a repetitive tone. The yellow LED blinks.
2
Press the PTT button within four (4) seconds of receiving a
Call Alert page to respond to the Private Call.
Call Alert page to respond to the Private Call.