Aastra Telecom 41-001286-00 Manuale Utente
Aastra MBU 400 User Guide
29
Using the 420d Handset
Changing the Access Code on the Gateway:
To change the gateway access code using the handset, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select
Settings
and press OK z.
3. Select
System Settings
, and press OK z.
4. Select
Access Code
, and press OK z.
5. Select
Gateway
, and press OK z.
6. Enter a new access code.
The characters display as you type, but are encrypted after saving the access code.
7. Press OK.
8. Press the
Yes
softkey when prompted to save the access code.
The new access code is saved by the gateway. Record the access code here for
future reference:
future reference:
Note: All handset access codes must match the gateway access code, or the
handsets will not register after the next reset.
handsets will not register after the next reset.
Changing the Access Code on the Handset
To change the handset access code, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select
Settings
and press OK z.
3. Select
System Settings
, and press OK z.
4. Select
Access Code
, and press OK z.
5. Select
Handset
, and press OK z.
6. Enter a new access code.
The characters display as you type, but are encrypted after saving the access code.
7. Press OK z.
8. Press the
Yes
softkey when prompted to save the access code.
9. Press the red key
to exit.
Note: All handset access codes must match the gateway access code, or the
handsets will not register after the next reset.
handsets will not register after the next reset.
CLR
CLR