Garmin 530HCx Manuale Utente

B

aSIc

 o

peratIon

1.  Using the 

Rocker, select the Channel or Code 

field, and then press 

Enter to show a list of 

available channels/codes.

2.  Move the 

Rocker up or down to scroll through 

the selections. Because not all the items fit in the 

window, a slider bar on the right side indicates your 

current position in the list.

3.  Select one of the selections, and press 

Enter.

1.  Press the Volume Control (

V) key to open the 

Volume/Squelch Level Control window.

2.  Move the 

Rocker up or down to adjust the volume 

level.

3.  Use the 

Rocker to set the squelch level by moving 

the slider all the way to the left to unmute the 

background noise (weak signals that you do not 

want to hear). Then slowly move it to the right until 

the background noise stops. The squelch is set. 

Use the Scan option to scan through the available 

channels for activity. As the unit scans and detects 

activity on a channel, it pauses on that channel/code for 

a few seconds, then continues scanning. If you transmit 

during that pause, the transmission is on that channel.  

However, if you transmit when the scan has not paused, 

the transmission uses the channel set before scanning.
When the Rino is scanning and it receives an incoming 

signal, the Rino automatically decodes the code used by 

the incoming signal and uses that code when it transmits 

back.
Use the Set Scanlist option to pick which channels/codes 

to scan. Selecting specific channels/codes reduces the 

scan time and helps prevent missing a transmission. The 

Scanlist has option menu choices to Scan Current Codes 

or Scan All Codes. Choosing Scan Current Codes scans 

only the channel and code combination in memory.
Use the Monitor option to listen to a single channel for all 

activity on the current channel. Using the Monitor option