Sharp LC-19DV28UT Manuale Utente

•  When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly 

delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

•  Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a 

heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. 

  Storage temperature: –4°F to +140°F (–20°C to +60°C)

•  Playback doesn’t start.

•  No disc is inserted. (See page 29.)

•  The disc may be dirty. Clean up the disc. (See page 7.)

•  The TV/DVD cannot play CD-ROMs, etc. (See page 6.)

•  No picture.

•  TV/DVD selector is not set correctly. (See page 29.)

•  No sound.

•  Check the input selector of the amplifier is set properly.

•  The TV/DVD is in the special playback mode. (See page 30.)

•  Select the correct Audio Output position on AV amplifier. 

•  Picture is distorted during fast

  reverse/forward playback.

•  The picture will be distorted occasionally.

•  Stopping playback, search, 

slowmotion play, repeat play, or

  program play, etc. cannot be

 performed.

•  Some discs may not do some of the functions.

•  No surround sound.

•  The setup does not match your stereo system.

•  The TV/DVD or remote operation 

key is not functioning.

•  Turn off the TV/DVD and unplug the AC power cord for several minutes, then 

replug it.

•  Playback does not start when the

  title is selected.

•  Check the Parental setup. (See page 36.)

•  Audio soundtrack and/or subtitle

  language is not changed when

  you playback a DVD.

•  Multilingual language is not recorded on the DVD disc. (See page 31.)

•  No subtitle.

•  Some discs have no subtitles. (See page 31.)

•  Subtitles are cleared. Press SUBTITLE. (See page 31.)

•  Angle cannot be changed.

•  Multi-angles are not recorded on the DVD disc. (See page 31.)

•  “This operation can’t be performed” 

appears on the screen.

•  The function is prohibited with the TV/DVD or the disc. (See page 29.)

  

•  As a precautionary measure, make a note of your password above, cut it from this manual, and keep it in a safe place.

If you forget the password, clear the password using the following procedure.

Press and hold both VOL – on the TV/DVD and 

press 0 on the remote control simultaneously for 

a few seconds until 

MENU screen

 appears on the 

screen.

Now the old password was cleared. You can set 

the new password.

54W0131B.indb   39

5/19/10   10:56:05 AM