Dolby Laboratories DV2418 Manuale Utente

If you subscribe to a satellite service or a cable TV service which requires the use of a converter/ 
descrambler box, connect the incoming 75 ohm coaxial cable to the converter/descrambler box. Using 
another 75 ohm cable, connect the output of the converter/descrambler or satellite box to the antenna jack 
on the DVD Combo. Follow the connections shown below. Set the DVD Combo to the output channel of the 
converter/descrambler or satellite box (usually 3 or 4) and use the converter/descrambler or satellite box to 
select channels.

If you subscribe to a satellite service or a cable TV service in which basic channels are unscrambled and 
premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter 
and an A/B switch box (available from the cable company or an electronic supply store). Follow the 
connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled 
channels on your DVD Combo. With the switch in the "A" position, tune your DVD Combo to the output of 
the   converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune 
scrambled channels.

This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. 
Some Cable TV companies offer "premium pay channels" in which the signal is scrambled. Descrambling these 
signals for normal viewing requires the use of a descrambling device and is generally provided by the cable company.

For basic cable service not requiring a converter/descrambler box, 
connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the 
rear of the DVD Combo.