SonicWALL 5.8.1 Manuale Utente
Wizards > Setup Wizard
1402
SonicOS 5.8.1 Administrator Guide
WAN Network Mode: NAT Enabled
17.
Enter the public IP address provided by your ISP in the SonicWALL WAN IP Address,
then fill in the rest of the fields: WAN Subnet Mask, WAN Gateway (Router) Address, and
DNS Server Addresses. Click Next.
then fill in the rest of the fields: WAN Subnet Mask, WAN Gateway (Router) Address, and
DNS Server Addresses. Click Next.
18.
Proceed to
.
WAN Network Mode: NAT with DHCP Client
DHCP is a networking mode that allows you to obtain an IP address for a specific length of time
from a DHCP server. The length of time is called a lease which is renewed by the DHCP server
typically after a few days. When the lease is ready to expire, the client contacts the server to
renew the lease. This is a common network configuration for customers with cable or DSL
modems. You are not assigned a specific IP address by your ISP.
from a DHCP server. The length of time is called a lease which is renewed by the DHCP server
typically after a few days. When the lease is ready to expire, the client contacts the server to
renew the lease. This is a common network configuration for customers with cable or DSL
modems. You are not assigned a specific IP address by your ISP.
19.
The Setup Wizard window states that the SonicWALL’s DHCP Clients will attempt
dynamically obtain an IP address from the SonicWALL. To confirm this, click Next.
dynamically obtain an IP address from the SonicWALL. To confirm this, click Next.
20.
Proceed to
.