SonicWALL 5.8.1 Manuale Utente
Network > Interfaces
206
SonicOS 5.8.1 Administrator Guide
HP’s ProCurve Manager Plus (PCM+) and HP Network Immunity Manager (NIM) server
software packages can be used to manage the switches as well as some aspects of the
SonicWALL UTM appliance.
software packages can be used to manage the switches as well as some aspects of the
SonicWALL UTM appliance.
To configure the SonicWALL appliance for this scenario, navigate to the Network > Interfaces
page and click on the configure icon for the X0 LAN interface. On the X0 Settings page, set the
IP Assignment to ‘Layer 2 Bridged Mode’ and set the Bridged To: interface to ‘X1’. Also make
sure that the interface is configured for HTTP and SNMP so it can be managed from the DMZ
by PCM+/NIM. Click OK to save and activate the change.
page and click on the configure icon for the X0 LAN interface. On the X0 Settings page, set the
IP Assignment to ‘Layer 2 Bridged Mode’ and set the Bridged To: interface to ‘X1’. Also make
sure that the interface is configured for HTTP and SNMP so it can be managed from the DMZ
by PCM+/NIM. Click OK to save and activate the change.
You will also need to make sure to modify the firewall access rules to allow traffic from the LAN
to WAN, and from the WAN to the LAN, otherwise traffic will not pass successfully. You may
also need to modify routing information on your firewall if your PCM+/NIM server is placed on
the DMZ.
to WAN, and from the WAN to the LAN, otherwise traffic will not pass successfully. You may
also need to modify routing information on your firewall if your PCM+/NIM server is placed on
the DMZ.
E7500
Network Security Appliance
ISP
HP ProCurve
Switch
Switch
Router
Third-party Firewall
SonicWALL NSA Appliance
File
Server
Server
Email
Server
Server
HP HCM/
NIM + Server
NIM + Server
Wireless
Client
Client
Desktop
Client
Client
DMZ Connection
WAN Connection
LAN/L2B Mode Connection