SonicWALL 5.8.1 Manuale Utente
Network > Interfaces
219
SonicOS 5.8.1 Administrator Guide
Configuring Interfaces
This section is divided into:
•
•
•
•
•
•
•
•
•
•
•
Configuring the Static Interfaces
Static means that you assign a fixed IP address to the interface.
Step 1
Click on the Configure icon
in the Configure column for the Interface you want to
configure. The Edit Interface window is displayed.
•
You can configure X0 through X8, depending on the number of interfaces on your
appliance.
appliance.
•
If you want to create a new zone, select Create new zone. The Add Zone window is
displayed. See
displayed. See
for instructions on adding a zone.
Step 2
Select a zone to assign to the interface. You can select LAN, WAN, DMZ, WLAN, or a custom
zone.
zone.
Step 3
Select Static from the IP Assignment menu.
Step 4
Enter the IP address and subnet mask of the zone in the IP Address and Subnet Mask fields.
Note
You cannot enter an IP address that is in the same subnet as another zone.
Step 5
Enter any optional comment text in the Comment field. This text is displayed in the Comment
column of the Interface table.
column of the Interface table.
Step 6
If you want to enable remote management of the SonicWALL security appliance from this
interface, select the supported management protocol(s): HTTP, HTTPS, SSH, Ping, SNMP,
and/or SSH.
interface, select the supported management protocol(s): HTTP, HTTPS, SSH, Ping, SNMP,
and/or SSH.
To allow access to the WAN interface for management from another zone on the same
appliance, access rules must be created. See
appliance, access rules must be created. See
for more information.
Step 7
If you want to allow selected users with limited management rights to log in to the security
appliance, select HTTP and/or HTTPS in User Login.
appliance, select HTTP and/or HTTPS in User Login.
Step 8
Click OK.