SonicWALL 5.8.1 Manuale Utente

To determine the traps that are possible when using IPS Sniffer Mode with Intrusion Prevention 
enabled, search for Intrusion in the table found in the Index of Log Event Messages section in 
the SonicOS Log Event Reference Guide. The SNMP trap number, if available for that event, 
is printed in the SNMP Trap Type column of the table. 

To determine the possible traps with Gateway Anti-Virus enabled, search the table for Security 
Services, and view the SNMP trap number in the SNMP Trap Type column.

To enable and configure SNMP:

Select the System tab, Administration folder from the navigation panel.

Scroll down to the Advanced Management section.

Select the Enable SNMP checkbox. The Configure button becomes active.

Click Configure. The SNMP Settings dialog box is displayed.

In the SNMP Settings dialog box, for System Name, type the name of the SNMP manager 
system that will receive the traps sent from the SonicWALL.

Enter the name or email address of the contact person for the SNMP Contact

Enter a description of the system location, such as “3rd floor lab”.

Enter the system’s asset number.

For Get Community Name, type the community name that has permissions to retrieve SNMP 
information from the SonicWALL, e.g. public.

For Trap Community Name, type the community name that will be used to send SNMP traps 
from the SonicWALL to the SNMP manager, e.g. public.

For the Host fields, type in the IP address(es) of the SNMP manager system(s) that will receive 
the traps.

Click OK.