SonicWALL 5.8.1 Manuale Utente

To edit the settings of an individual SonicPoint:

Under SonicPoint Settings, click the Edit icon 

 in the same line as the SonicPoint you want 

to edit.

In Edit SonicPoint screen, make the changes you want. See 

 for instructions on configuring these settings.

Click OK to apply these settings.

Click Synchronize SonicPoints at the top of the SonicPoint > SonicPoints page to update 
the settings for each SonicPoint reported on the page. When you click Synchronize 
SonicPoints, SonicOS polls all connected SonicPoints and displays updated settings on the 
page.

You can enable or disable individual SonicPoints on the SonicPoint > SonicPoints page:

Check the box under Enable to enable the SonicPoint, uncheck the box to disable it.

Click Accept at the top of the SonicPoint > SonicPoints page to apply this setting to the 
SonicPoint.

Not all SonicOS Enhanced firmware contains an image of the SonicPoint firmware. To check, 
scroll to the bottom of the SonicPoint > SonicPoints page and look for the Download link.

If your SonicWALL appliance has Internet connectivity, it will automatically download the 
correct version of the SonicPoint image from the SonicWALL server when you connect a 
SonicPoint device.

If your SonicWALL appliance does not have Internet access, or has access only through a 
proxy server, you must perform the following steps:

Download the SonicPoint image from 

 to a local system with 

Internet access. 

You can download the SonicPoint image from one of the following locations:

On the same page where you can download the SonicOS Enhanced firmware

On the Download Center page, by selecting SonicPoint in the Type drop-down menu

Load the SonicPoint image onto a local Web server that is reachable by your SonicWALL 
appliance.