SonicWALL 5.8.1 Manuale Utente

If the Delete or Edit icons are dimmed (unavailable), the access rule cannot be changed or 
deleted from the list. 

To add access rules to the SonicWALL security appliance, perform the following steps:

Click Add at the bottom of the Access Rules table. The Add Rule window is displayed. 

In the General tab, select Allow | Deny | Discard from the Action list to permit or block IP 
traffic.

Select the from and to zones from the From Zone and To Zone menus.

Select the service or group of services affected by the access rule from the Service list. The 
Default service encompasses all IP services. 

 

If the service is not listed, you must define the service in the Add Service window. Select 
Create New Service or Create New Group to display the Add Service window or Add Service 
Group window. 

Select the source of the traffic affected by the access rule from the Source list. Selecting 
Create New Network displays the Add Address Object window.

If you want to define the source IP addresses that are affected by the access rule, such as 
restricting certain users from accessing the Internet, type the starting IP addresses of the 
address range in the Address Range Begin field and the ending IP address in the Address 
Range End field. To include all IP addresses, type * in the Address Range Begin field.

Select the destination of the traffic affected by the access rule from the Source list. Selecting 
Create New Network displays the Add Address Object window.