Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Manuale Utente
Part 1 – AT Commands for All Universal IP Devices
Chapter 1 – General AT Commands for All Universal IP Devices
Universal IP AT Commands Reference Guide (Document S000457K)
10
Chapter 1 – General AT Commands
for All Universal IP Devices
Set Commands
AT – Command Mode
Description:
If the modem responds OK to an AT command, the modem is likely in command mode. Many
commands will respond with ERROR when the modem is connected to the network.
E – Turn Echo ON/OFF
Description:
Use this command to turn ON/OFF echoing command at the serial terminal.
Syntax:
ATE[<setting>]
Values
:
0 – turn echo off.
1 – turns echo on.
1 – turns echo on.
I – Identification
Description:
Displays identification parameters
.
Syntax:
ATI[<value>]
Responses:
For MT100SEM: "1.00 to 1.00g"
For MT810SWM-IP: "1.xx" (Note: "xx" is the number.)
OK
Values:
3 – Identifies the firmware version.
Example:
Version:MT810swm Release V1.0 (12-August-09)
OK
5 – Identifies the country.
Example: "B5" (MT100SEM example)
V – Terse or Verbose
Description:
Sets terse or verbose responses.
Syntax:
ATV[<value>]
ATV? Displays the current V setting or use AT#VALL to view all settings.
Values:
0 – Sets terse mode (ATV also sets terse mode)
1 – Sets verbose mode
Default:
ATV1