Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Manuale Utente

Part 1 – AT Commands for All Universal IP Devices

Chapter 5 – TCP AT Commands

Universal IP AT Commands Reference Guide (Document S000457K)

#TCPTELNETMODE – Enable/Disable TCP Client Telnet Protocol

Description:

Enables or disables the TCP Client Telnet protocol.

Note:

Allows the TCP Client Telnet to handle a minimal telnet protocol.

Note:

This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)

Note:

TCP Client raw mode requires the username and password each to be followed by
a line feed character not just any key.

Syntax:

AT#TCPTELNETMODE=<parameter1>, <parameter2>

Values:

parameter 1

1 TCP profile 1
2 TCP profile 2

parameter 2

0 Disable TCP Client Telnet protocol function
1 Enable TCP Client Telnet protocol function with username and password login
2 Enable TCP Client Telnet protocol function without username and password login
3 Enable TCP Client raw mode function with username and password login

Responses:

\r\n#TCPTELNETMODE: VALUE1,VALUE2\r\n
\r\nOK\r\n
\r\nERROR\r\n

Examples:

send: AT#TCPTELNETMODE=1,1\r

reply: \r\nOK\r\n

send: AT#TCPTELNETMODE=1\r

reply: \r\n#TCPTELNETMODE: 1,1\r\n

reply: \r\nOK\r\n

#TCPTELNETPW – Configure the TCP Client Telnet Protocol Login Password

Description:

Configures the login password for the TCP Client Telnet protocol.

Note:

This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)

Syntax:

AT#TCPTELNETPW=<parameter1>, <parameter2>

Values:

parameter 1

1 TCP profile 1
2 TCP profile 2

parameter 2

64 character alphanumeric string

Responses:

\r\n#TCPTELNETPW: VALUE1,VALUE2\r\n
\r\nOK\r\n
\r\nERROR\r\n

Examples:

send: AT#TCPTELNETPW=1,"PASSWORD"\r

reply: \r\nOK\r\n

send: AT#TCPTELNETPW=1\r

reply: \r\n#TCPTELNETPW: 1,"PASSWORD"\r\n

reply: \r\nOK\r\n