Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Manuale Utente
Part 3 – AT Commands for Wi-Fi Devices
Chapter 11 – General AT Commands for the SocketWireless Wi-Fi
Universal IP AT Commands Reference Guide (Document S000457K)
62
#BOOTMSG – Enable/Disable Boot Message
Description:
Enables/disables the boot message.
Syntax:
AT#BOOTMSG=<0,1>
AT#BOOTMSG? Read or display the current setting.
AT#BOOTMSG? Read or display the current setting.
Values
:
0 - Disable
1 - Enable
Default
:
1
Enable
Examples:
AT#BOOTMSG?
0
OK
OK
AT#BOOTMSG=1
OK
AT#BOOTMSG?
1
OK
OK
AT#BOOTMSG?
1
OK
AT#BOOTMSG=0
OK
OK
#WATCHDOG – Enable/Disable Watchdog
Description:
Enable/disable Watchdog for the system – reset on HANG.
Note:
The module must be reset to put the command into effect.
Syntax:
AT#WATCHDOG=<0,1>
AT#WATCHDOG?
AT#WATCHDOG?
Values
:
0 - Disable Watchdog
1 - Enable Watchdog
Default Value
: 1
Enable Watchdog
Example:
AT#WATCHDOG?
1
OK
#WATCHDOGTIMER – Watchdog Timer
Description:
Sets the Watchdog timer in milliseconds.
Note:
The module must be reset to put the command into effect.
Syntax:
AT#WATCHDOGTIMER=<value>
AT#WATCHDOGTIMER? Read or display the current setting.
AT#WATCHDOGTIMER? Read or display the current setting.
Values
:
Maximum milliseconds that can be entered is 7000
Default
:
1000ms
Example:
AT#WATCHDOGTIMER?
4000
OK