Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Manuale Utente
Part 3 – AT Commands Wi-Fi Devices
Chapter 13 – WLAN AT Commands for the SocketWireless Wi-Fi
Universal IP AT Commands Reference Guide (Document S000457K)
70
#WEP128KEY – Keys for WEP128 Security Mode
Description:
Sets keys for WEP128 Security mode.
Note:
The module must be reset to put the command into effect.
Syntax:
AT#WEP128KEYn ="<value>"
AT#WEP128KEYn? Read or display the current setting.
Values
:
ASCII text string of 26 hexadecimal characters; valid characters include: 0-9, a-f or A-F
Default
:
12345678901234567890123456
#WPAPSKKEY – Keys for WPA PSK Security Mode
Description:
Sets keys for WPA PSK security mode.
Syntax:
AT# WPAPSKKEYn ="<value>" n=1-4
AT# WPAPSKKEYn? Read or display the current setting.
Values
:
ASCII text string of 8 to 64 hexadecimal characters; e.g., 1234567890. They can include any
ASCII character from 32-126 decimal.
ASCII character from 32-126 decimal.
Default
:
1234567890
#WPA2PSKKEY – Keys for WPA2 PSK Security Mode
Description:
Sets keys for WPA2 PSK security mode.
Syntax:
AT# WPA2PSKKEYn ="<value>" n=1-4
AT# WPA2PSKKEYn? Read or display the current setting.
Values
:
ASCII text string of 8 to 64 hexadecimal characters; e.g., 1234567890. They can include any
ASCII character from 32-126 decimal.
ASCII character from 32-126 decimal.
Default
:
1234567890
#WEPKEYID – Set the Default TX Key Index
Description:
Sets the default Transmission Key used for data encryption in WEP.
Note:
The module must be reset to put the command into effect.
Syntax:
AT#WEPKEYID=<value>
Values
:
1 – 4
Default Value
: 1
Example:
AT#WEP?
WEPKEYID:1
WEPKEYID:1
OK
#WLANPOWERSAVE – Enable Power Save at Boot
Description:
This command sets the Power Save at the Boot Works after the Power Cycle.
Syntax:
AT#WLANPOWERSAVE=<value>
Values
:
0 - Power Save Disabled
1 - Power Save Enabled
Default:
0