Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Manuale Utente
Part 4 – AT Commands for the SocketModem iCell, SocketModem IP, and MultiModem iCell
Chapter 14
Universal IP AT Commands Reference Guide (Document S000457K)
83
#AUTOCONNECT – Automatically Connect the PPP Link
Description:
#AUTOCONNECT enables/disables the automatic link connection. The APN or ISP values need
to be set correctly.
to be set correctly.
Values:
0 - AUTOCONNECT disabled
1 - AUTOCONNECT enabled
Syntax:
AT#AUTOCONNECT=<value>
AT#AUTOCONNECT? Read or display the current setting (or AT#VALL).
Default:
0
#PPPMODE – Set TCP/IP Behavior
Description:
The TCP/IP stack can manage the access layer in different ways. This parameter selects the way
the TCP/IP stack must run once the physical is layer successfully established.
the TCP/IP stack must run once the physical is layer successfully established.
Syntax:
AT#PPPMODE=<value>
AT#PPPMODE? Read or display the current setting (or AT#VPPP, AT#VALL).
Values:
3 - Standard PPP. The TCP/IP stack behaves as a PPP client for outgoing calls and as a PPP
client for incoming calls.
Default:
3
#PPPMYIP – Set IP Address When Using PPP
Description:
When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter
setting), it is in charge of the IP address attribution mechanism.
setting), it is in charge of the IP address attribution mechanism.
Once the PPP authentication is successfully achieved, the remote PPP peer asks the TCP/IP
stack for an IP address. Then the related PPP layer, called IPCP, suggests an IP address to the
peer that has been previously stored in the TCP/IP stack parameters. If the remote accepts this
address, the IP link is then established.
stack for an IP address. Then the related PPP layer, called IPCP, suggests an IP address to the
peer that has been previously stored in the TCP/IP stack parameters. If the remote accepts this
address, the IP link is then established.
This parameter defines the IP address to be attributed to the TCP/IP stack when the PPP Server
mode is running.
mode is running.
Syntax:
AT#PPPMYIP=<value>
AT#PPPMYIP? Read or display the current setting (or AT#VPPP, AT#VALL).
Values:
32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx).
Default:
0.0.0.0
#PPPPEERIP – Set IP Address for Remote PPP
Description:
When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter
setting), it is in charge of the IP address attribution mechanism.
setting), it is in charge of the IP address attribution mechanism.
Once the PPP authentication is successfully achieved, the remote PPP peer asks the TCP/IP
stack for an IP address. Then the related PPP layer, called IPCP, suggests an IP address to the
peer that has been previously stored in the TCP/IP stack parameters. If the remote accepts this
address, the IP link is then established.
stack for an IP address. Then the related PPP layer, called IPCP, suggests an IP address to the
peer that has been previously stored in the TCP/IP stack parameters. If the remote accepts this
address, the IP link is then established.
This parameter defines the IP address to be attributed to the remote PPP peer when the PPP
Server mode is running.
Server mode is running.
Syntax:
AT#PPPPEERIP=<value>
AT#PPPPEERIP? Read or display the current setting (or AT#VPPP, AT#VALL).
Values:
32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx).
Default:
0.0.0.0