Manuale UtenteSommarioInstall the RF Module(s)1Unpack and Inspect the RF Module1Remove Release Liners from the RF Module2Check the DC Power Switch for the Module Bay4Dual-Bay Modules Only—Remove the Module Bay Shelf5Install the RF Module into the Prism Remote Chassis6Secure RF Module Latches13Connect Latches on Single-Bay and HDM RF Modules14Connect Latches on Dual-Bay RF Modules15Latches on Legacy Dual-Bay 40W RF Modules16Verify that the RF Module Mounting Hook is Engaged17Connect the RF Module Cables to the PRU Chassis17Connecting Cables in a Single-Bay RF Module Installation17Connecting Cables in a Dual-Bay RF Module Installation22Power on the RF Module(s) and the Prism Remote Unit26Close the Remote Unit Door and Solar Shield28Provision the Prism Remote Unit28FlexWave Notch Filter (FWP-SPRINTFILTER)29Fan Module Maintenance33Annual Fan Checkup33Potential Fan Alarms33Replacing the Fan Module33Specifications36DCCS Global Technical Support38Telephone Helplines38Online Support38Waste Electrical and Electronic Equipment Recycling38DCCS Technical Training39Accessing FlexWave User Documentation40Accessing Prism User Documentation40Accessing Spectrum User Documentation40Dimensioni: 3,17 MBPagine: 41Language: EnglishApri il manuale
